Getting a stopped rooftop air unit running again.
A make-up-air unit on the roof had stopped. A broken belt was the cause. The belt and filters were replaced, the unit was adjusted and restarted, and the work was recorded for the building.

Routine maintenance that explains why the unit stopped.
The unit had stopped. Inspection found a broken belt, so the belt was replaced and tensioned, the filters were changed, and the unit was restarted and checked.
For a managed building, the record shows why the unit stopped, what maintenance was done, and where the next visit should start.
Inspect, correct, restart, record.
Confirm the operating condition
Check power, controls, safety switches, belts and filters before blaming one part.Complete the maintenance
Replace the broken belt, set the tension, change the filters, and only do work that is actually needed.Restart and observe
Restart the unit and make sure it runs properly before leaving.Leave a serviceable record
Record what was found, what was done, how it is running, and what maintenance comes next.Running again, with a record for next time.
The unit is running again, and the belt and filter work is on record. That is far more useful to the building than a note saying "reset unit".
Operating condition assessed
Belt and filter maintenance completed
Unit restarted and checked
Follow-up record created for the building
Start with the problem. We will help plan the next step.
More case studies like this one.
These are selected for the same type of system, property, or service concern. The full library is available when you want to explore more.
Know someone who needs a plumber?
Two easy ways to send people our way, and a quick one if we did a good job for you.

